Ultra Heavy Raw (UHR), AKA 21/23oz Denim

[Jestocost]

@Alex are those rankings since the start of IHUK, or YTD? I'm curious if the 888s are genuinely the least popular, or if the rankings are skewed because they're the newest core cut.

[Alex]

Since Jan 2019…

[the246guy]

I have a question in general related to the shrinkage and the correct sizing. I'm usually around 80 cm on the waist and Tag size 30 fits me perfectly fine in the 666 XHS where the waist comes in around 78-79 cm new and after stretch it kind of settles around 80 to 81 cm. The UHR in 666 cut, the measurement says for tag size 31 the waist is 82.x cm and given the shrinkage of 1 inch on the waist, that would mean the waist would be around 80 cm roughly. Correct? So for my needs, I should be looking at Tag size 31 for the 666. Am I right?

[sabergirl]

Waist on the UHR should shrink an inch with soak/wash, but it will stretch out to pre-soak size again with wear. For waist measurement, you want a pair that looks good on the chart. Thigh, back rise, and inseam will shrink and won’t come back though, so be mindful of this too.

Sent from my iPhone using Tapatalk

[Kasi]

His 25oz was tight in the waist.. had  to do the car jack hack

Wonder if he gets it right this time

Sent from my iPhone using Tapatalk

[popvulture]

@Alex:

Total sales inc. retailers
777
555
666
634
888

Direct sales only
555
777
666
634
888

Lol one day the skinny trend will die… one day. I'm ready.

[Dmart]

Haha. Me too. But to be honest, thanks god that tastes are different. Wouldn’t it be boring if we all would wear 634 or 555?

[goosehd]

Me three…I have tree trunks for legs from years of running, weight lifting, and cycling (and now rowing).

Skinny jeans won't fit over my calves...

[Dmart]

Same here with the legs. My main issue however, is that I won’t fit the skinny jeans over my Engineers.

[goosehd]

In complete agreement!!!  I even have to be careful with the 666's on occasion and I find the 634's are ideally made for engineer boots.

[popvulture]

I've always had a pretty good experience with 666s and engineers, but 634s are indeed ideal. I've said it many times, but I wish there were an 888 with a wider leg opening — I love that higher waist but the hem's tough with my engineers.

TBH I'm not really a hater when it comes to skinnier fits — they're just not for me. The painted-on ones are very comical, though. Overall though I just feel like that trend has been around waaaaay too long. I mean… since like... 2006? F'n hell.

[goosehd]

Full disclosure:  My Wesco's are all custom to account for wide feet and large calves.  I very rarely have issues with the 666's but it is something I watch.  The 888's are a no go with my Wesco Engineer Boots…

[Kasi]

When they grow up bit more…

That’s when the 666 and 634 come in…

[Jett129]

Dude,I’m pushing 70 and wear 555s almost every day. Wear them with Engineers,Western boots and sneakers. If I haven’t grown up by now it’s probably toooo late. Full disclosure actually wearing an old pair of 634 Blacks,that were taken in a little,so half way between 555 and 634.

[goosehd]

Arthur, much love and respect!!!

@Kasi It's all down to body shape and nothing more.  Some guys can pull off the different cuts and some can't.

[Jcaz6996]

Each to there own I’ve only bought 555’s I think it fits my build spot on 6ft 1 slim build  A few years of long distance running and a physical job keeps the weight off.

A loser fitting denim just wouldn’t look right on me I don’t think.

[popvulture]

I can wear em all, but I guess it just comes down to comfort for me. Skinnier jeans squeeze my calves more than I like — they're a bit on the bigger side due to me being a runner and I also just like the way wider leg jeans drape over boots. I'm tall, so rise is also an issue for me. Of course to each their own, as Goose said it's all down to pref and body type. And fwiw I don't mind the look of any of the IH skinnier cuts, definitely nothing silly  like I see from the Hypebeast crowd.

[Jett129]

I've tried the 666 and 888,and they didn't work for me 777s are borderline and my 634s have been my go to riding jeans for the past 11 years.

[the246guy]

@sabergirl:

Waist on the UHR should shrink an inch with soak/wash, but it will stretch out to pre-soak size again with wear. For waist measurement, you want a pair that looks good on the chart. Thigh, back rise, and inseam will shrink and won’t come back though, so be mindful of this too.

Sent from my iPhone using Tapatalk

That's a bit confusing. I can't decide if I should go with the provided measurements of the 666 in a Tag Size 31 or Tag Size 30. What did the others do? Did you guys size up?

[pechelman]

If your desired waist size is 80cm then the tag size 30 would appear to provide that.

It will shrink 1" from the value on the chart and then stretch back out after wear back to this original dimension.
As sabergirl said, also keep an eye on the other dimensions that will also shrink from the raw measurement chart (by about ~4%) that will not stretch back out as readily such as thigh and rises.