IHSH-218-BLK - 12oz Selvedge Denim Western Shirt "The Johnny Cash III" - Superblack
-
@the246guy hopefully yes
-
Need this. Fingers crossed it’s back soon
-
100% know that feeling unfortunately
-
Any expected arrival estimates?
-
Any updates on Restock?
-
I am interested in a restock as well ::)
-
Do you know if IH Germany will restock as well?
-
Set up the "Notify Me" feature from the IH Germany website. Now I have to just wait for this to arrive.
-
Set up the "Notify Me" feature from the IH Germany website. Now I have to just wait for this to arrive.
Perfect, you will be automatically notified when the article is online. Thanks!
-
Set up the "Notify Me" feature from the IH Germany website. Now I have to just wait for this to arrive.
So do I…
-
This is so nice looking, but now its hard to decide between this and the IHSH-235!
-
Will this one be restocked this week as well @Alex - like the other classic shirts.
-
Any new here @Alex ?
-
Thanks @Alex
-
Decided to try to shrink my XL Johnny Cash III. I’ve had it for a year, but it’s always been slightly big. Obviously this is a generalisation, but I’m often between sizes in IH shirts; usually an L would provide ideal chest/opening measurements, but I need the shoulder/length/sleeve dimensions of an XL. When in doubt, I err on the side of caution and grab an XL.
I’d previously achieved a tiny bit of shrinkage washing at 40C @ 400RPM, but it didn’t tighten up as much as I wanted. I decided to wash it at 60C, 400RPM. I hang dried and got impatient to wear it, so once it was almost dry I stuck it in the tumble drier for 30 minutes. Thought I’d record the shrinkage in case it could help others. Just to reiterate, the before measurements aren’t from new but are after a 40C wash. I’d recommend anyone trying to shrink this shirt to attempt it in steps, gradually increasing temp until you achieve the desired fit.
Before // After
Shoulders: 18.9 // 18.5
Chest: 23.1 // 22.6
Waist: 22.5 // 21.5
Opening: 22.7 // 22.0
Length: 30.2 // 29.7
Sleeve: 26.3 // 25.5Shirt is now perfect for me. Worth noting is that the process has faded the shirt quite a bit. I’ll try to take some photos later. But if you want the shirt to remain jet black then don’t try to replicate this!