IHWE-MRLOU-BLK - Wesco® - 10" Horsehide Pull-On "Mister Lou" Engineer Boot - Black

[pechelman]

Don't neglect that leather sole either. If you have some of the hd obenaufs hit that with a bit too.

Everytime I use obenaufs I find the boots breathe less good for a week and then seem to improve as the leather lightens back to its previous color and get some of its shine back.

Looking good though!

[Oaktavia]

Thanks guys, now I'm onto my brown CXL pair.

@pechelman I don't have any of that stuff at the moment but I see what you mean.

[pechelman]

The regular oil will do the trick too or really anything

[Oaktavia]

@pechelman yes afterwards I went ahead and did, figuring it would do the trick.

[seawolf]

@Oaktavia How did it go with your boots?

[Oaktavia]

@seawolf I ended up oiling both pairs again but only the bottom parts of them. They both drank up the oil quite a bit and ended up looking nearly the same as they did before treatment. Especially the black pair. I coated them again yesterday and wore the black ones today.

[seawolf]

@Oaktavia Well, now you know they're conditioned for sure. How does the leather feel?

[nrtphotos]

I’ve barely worn mine over the last year, the instep is really tight. Not sure how much I can expect them to break in

[Oaktavia]

@seawolf it feels quenched yet not oversaturated. I think I gave them just enough. The upper part of the boot above the larger buckle is amazingly soft and supple. Much different than before.

[seawolf]

@nrtphotos In my experience with Wesco engineer boots, that's a feature, not a bug. The boot stays on your foot because of how it fits around your instep. It'll loosen up a bit as you break them in. One thing you can do in the meantime is remove the insole until they're soft enough to not bother your instep any more. Once they're nice and soft, put the insole back in and you should be good to go.

[seawolf]

@Oaktavia That sounds ideal! Nicely done. Now you'll know for next time.

[nrtphotos]

@seawolf I sure hope they do, they make the top of my foot numb currently with the insert in!

[seawolf]

@nrtphotos That insert is pretty thick. Pull it out and give it a try. Also, you can wear thinner socks. I have faith!

[goosehd]

@nrtphotos You might be able to take them to a cobbler and see if they will stretch them for you. We did it to a pair of my wife’s cowboy boots and it worked out fantastically. Took them a few days to do.

She just went in, told them where her problem areas were, and they were able to stretch them out. They did two days of slowly stretching them, went on the third day to see how much progress was made and to try them on. Decided to do one more day of stretching and they’re just about perfect.

The cobbler took what was a pair of almost unwearable boots and took them to about 90-95% stretched to where my wife just wore them for a week and they were perfect.

[seawolf]

@goosehd Oh shit. I need to do this. I bought a boot stretcher, but it's not quite hitting the right spot, and I need some more help. Thank you for this!

[goosehd]

@seawolf They also sprayed the leather (I think with an isopropyl alcohol/mixture) to aide in the stretching of the leather. Took it very slow to not damage the leather fibres.

[seawolf]

@goosehd That sounds great. I should call around and find a cobbler that can do this. My right instep is a bit more pronounced than normal and it's painful sometimes when I wear my non-custom Wescos.

[goosehd]

@seawolf Also, the stretcher they used looked like this, which really helped with problem areas:

[pechelman]

Talk to Wesco about stretching. They can do this for you and they didn't charge me anything. Not sure if it's the same these days or not.

[seawolf]

@goosehd Oh no. That's what I have. FML. It doesn't quite hit the right spot. I need one that stretches up and down, not side to side. I'll go google that and see if it's a thing.