Repairs & Modifications

[ARNC]

@bizbuzz you’re welcome!

[TinMan]

@bizbuzz love that pattern, hope you find a good resolution.

[Matt]

Very easy to fix. Grab it from the back and pull it through. DON’T CUT IT!

[pechelman]

with all of the frenzy over OD'd UHF's, anyone else getting naughty thoughts about trying to OD one of theirs? Maybe OD in something like a dark red...

[Mizmazzle]

Well, my first self repairs. Sloppy AF but found it rather fun. Next time I’ll try and make things prettier.

[motojobobo]

These “IH-633S - Self Edge x Iron Heart 21oz Selvedge Jean Straight Tapered” are my favorite IH pair. The cut and fit are ideal for me. So they ended up being my most worn pair since mid 2017. I’ve always had jeans developing their first holes on the thighs…mystery to me why that happens. Also happened with the IHs. Har these repaired locally about six months ago, so roughly at their 6 year mark.

Have a trip to the US in April and I’ll be restocking my IH pickings. Have quite a stack at HQ bulit up over 12 months now, but the 633s will have to come from Self Edge.

[pechelman]

to avoid cluttering the other thread, does anyone know how a regular hickory fabric, e.g. IHSH-07, would take up dye? Would it be like this?
https://www.ironheart.co.uk/forum//post/793949

[SKT]

I have a 5oz dobby cloth work shirt (358) that I’d like to try and get to a light blue. Think I could bleach it to get the desired result without too much damage to the material? I have never attempted something like this so all advice appreciated

[endo]

@Alex_24

had problems with the slimness of the sleeves (again), so I got my 383 altered into a short sleeve which works pretty good for me

[T4920]

@SKT why not just throw it in the wash whenever you put a dark load on? I'd imagine you'd have the desired lightening after 5/6 washes, without causing any damage to the shirt.

[Matt]

I have an older one like that, tan/red. Mod looks great.

[Alex_24]

@endo looks perfect your tailor did a great job

[SKT]

@T4920 based on my 357, I’m not sure I could get it there with just washes. Here’s a pic of both. The western had been washed about 10 times in this pic. I’d like for the work version to be almost as light as a blue chambray. Still debating what to do.

[endo]

@SKT I've bleached a lot of IH stuff (Prof. Filthy award). You can do that, just start with a little bit of bleach added to the washing program, like 3 teaspoons of bleach. If you're not happy with the result (not bleached enough), repeat the procedure with the same amount. I wouldn't be concerned about the material, more that it gets too light. I used this.

[SKT]

@endo thanks. When adding the bleach do you add it to the water first and let it mix a bit before adding the clothing? I’m nervous

[tody]

@SKT the way i read it he used it in the washing machine, not while soaking.

[endo]

You can do both, either in a bowl or in your washing machine. When doing it with the machine I add the bleach when the water is running in via the dispenser drawer. In a bowl I'd put the bleach into the water first, stir and add the cloths at last.

[endo]

The results are different due to fabric and dye, therefore I suggest to titrate the amount of bleach from the lesser end and rather repeat the process a couple of times.

[SKT]

@tody I’ve never even used bleach on my whites so this is new to me. I just want to avoid streaks. Will start slow and up it from there like Endo says

[T4920]

I've just taken a pair of jeans into a local tailor for hemming due to some damage to the inner leg seam. Asked for 3 inches to be taken off.

He offered to preserve the original hemmed opening, and pointed out the roping looked very nice.

I couldn't wrap my little brain around how this is possible, and he couldn't really explain due to the language barrier..

Is this some thing anyone can explain to me? @JoshC perhaps.