IHSH-237-BLK - Ultra Heavy Flannel Crazy Check Western Shirt - Black
-
I’ll preface this by making it it clear that my personal opinion is just that and worth no more than any others, but button pull on th top two buttons is a deal breaker for me. I’d be an L in most IH shirts if I could tolerate button pull but it just looks daft to me.
One thing that @DrPat has said on this forum a few times and @tvenuto has developed is that workshirts are better on broader, bigger guys and while there are always exceptions I’ve come to see the sense in that.
..
Sizing up for layering IH is one of the joys of living in the cold north for me, whether it is shirts vests or jackets.
-
The button pull scenario seems common but that to me is indicative of incorrect fit. A couple of my L UHF’s do this but only because I gained a little weight. I simply keep the top snap undone.
Sent from my iPhone using Tapatalk
-
Hey All,
Letting everybody here know that we have a small run of the IHSH-237-Blk. Sizes from Large - XXL. If you have any questions or are interested in purchasing one of these, please contact us at cooper@shopcanoeclub.com.
-
Hey All,
Letting everybody here know that we have a small run of the IHSH-237-Blk. Sizes from Large - XXL. If you have any questions or are interested in purchasing one of these, please contact us at cooper@shopcanoeclub.com.
I was just looking at my buddy Alex’s he got from y’all. Y’all should open a shop out here in Alaska [emoji6]
Sent from my iPhone using Tapatalk
-
Thanks to the Homie Cooper @canoeclub for the Early Access Hook up
-
@alexswords We thank you for your continuous support, bro!! Thank you for making the Canoe Club name stand out!!
-
I have never experienced 'button pull, but I think that permex snaps fitted to UHFs gives the appearance of button pull anyway, see the pics above. My reservations about buying workshirts in UHF are for the opposite to @neph93 , showing just how subjective these things are. I have always been concerned at how well catseye type buttons will hold in button holes with material this thick, and not pop out. Thats why I have always stuck with the snaps on westerns for UHF, and workshirts for chambray.
I have my first UHF workshirt arriving tomorrow, so I'll be able to give a better view of my comparative thoughts then.
-
I’m talking obvious gaps and fabric distortion as a result of the chest being too small. I think it happens regardless of snaps or buttons but I’d imagine snaps are likely to make it more pronounced as they are fixed, whereas the physics of buttons/buttonholes allow for more wiggle room.
Never had an issue with buttons on UHF’s with the exception of an acknowledged issue on a shirt from a number of years ago where all the shirts had slightly large holes and the buttons had a tendency come out. A hot wash fixed it.
-
I do indeed have one sh131 that has a tendency of the buttons easily unfastening but it could easily be fixed.
Regarding sizing I think it's important to know your crucial areas and measurements. For me it's the shoulders. Anything below 19 is too tight and annoys me as it is too constricting. Unfortunately last year and this year the XL shoulders often were below 19" so I need to size up. And I agree on flannels better fitting a bit loose than like a dress shirt.The 238 would have had better measurements for me but I prefer the snaps over buttons, unless there will be a UHF with metal buttons one day. The 170 is just glorious.
-
@Max:
I do indeed have one sh131 that has a tendency of the buttons easily unfastening but it could easily be fixed.
That’s the one. Wearing it right now in fact. My first, and probably favourite, flannel.
@Max:
170 is just glorious.
That is truly a fantastic shirt. I’ve considered asking to buy the aluminium buttons to upgrade my IHSH-225. Either that or go for some GA pimpage.
-
Just had to make that comparison
-
I’m talking obvious gaps and fabric distortion as a result of the chest being too small.
@neph93 I think that most of the western shirts I see have this "button pull" effect. In most of these pictures, I've noticed that the button pull effect on the shirts, even when they aren't on. Unless you're talking about something else. Like the button looks like it might burst any moment.
-
Well done @cj let's see a fitpicture
-
I’m talking obvious gaps and fabric distortion as a result of the chest being too small.
@neph93 I think that most of the western shirts I see have this "button pull" effect…. like the button looks like it might burst any moment.
I’m talking about clearly visible gaps horizontally between the placket and facing shirt body, and between each button vertically. It is caused when the shirt is too tight over the chest normally, but also over the belly or shoulders.
Personally I think if you are standing in a neutral position and you see that then the shirt doesn’t fit.
-
Fit question my guys. Top is Medium, bottom is large. Sorry for the bad iPhone photos. I’m 5’11” about 175 pounds. Any input is appreciated.
-
@Dork:
Fit question my guys.
Large looks better. i think someone already said this, but flannels are meant to be worn a bit looser. thats just my opinion though.
-
Go with the large. You can shrink it a tad if it feels big but if the medium shrinks you’ll be SOL
Sent from my iPhone using Tapatalk
Many thanks to all that suggested the size L over the size M!
