IH-888-NT - 21/23oz indigo Selvedge DWC Jeans

[neph93]

They’re 100% cotton so 60C won’t spoil the fabric. The only real danger with washing these is white lines caused by abrasion when creased. It’s agitation that creates the potential for that problem (spin in the machine for example) and that can happen whatever the temp.

The best method for avoiding these abrasion lines is to thoroughly soak the garment before washing. I use a shower head and just spray inside and out. Once the garment is wet the creases formed in the machine are less rigid and friction is redused.

The other risk is the patch getting dried and cracked st high water temps. If you’re particular about this (I’m not) then you can oil it before washing.

[Norrin]

Yeah I always soak before wash for fear of the dreaded white lines!
I've never know a pair of raw jeans to be so resistant to shrinking before.

[neph93]

^ it is odd how the same fabric appears to shrink differently.

[Norrin]

I've been wearing them quite a bit this winter, & I'm liking them better than I did initially.
I'd still be happier with more shrinkage though, so I reckon I'll do a 60° wash this week.

[Dion]

Happy to help, Norrin! As neph already stated is a decent soak before washing highly recommended to avoid any unpleasant surprises. I always soak/wash inside out.

[Matty123]

What’s the highest temp  you recommend soaking or washing? I agitate by hand in the tub because my washer is too aggressive. I would like some More shrink.

[Dion]

Well, I never went beyond 60° C (140° F) and you can get great results with this mode. Though, I remember some people on other threads went full 90° C (194° F) and could even beat the 21 oz into shrinkage submission.

[Matty123]

Thank you. Yeah I might need to go up to 160F and see how it goes and maybe go up after that.

[manufc10]

@Matty123:

What’s the highest temp  you recommend soaking or washing? I agitate by hand in the tub because my washer is too aggressive. I would like some More shrink.

Why do you say it's too aggressive?  Do you have a top load?

[Matty123]

Yes I have a top loader. It’s a low profile agitator but it’s streaked a pair of Tellason’s pretty badly. Not that I care because they are beaters that I used when I was pouring concrete. But I don’t want my NT’s creased and streaked with white marks

[joephoto]

After about 60 wears I put mine in the wash at 40 degrees. Must say I like the fit better than before. Still a very nice relaxed fit, but the seat has shrunk up a bit and i'd say there has been 1/4 inch or so through the thighs and bottom opening. I'd guess that the measurements now on these is very close to the 21oz measurements.

Joe

[Jordanxbuffer]

I smell a wash coming on soon, probably within a week or 2.

Sent from my iPhone using Tapatalk

[Herman]

@Giles:

You can try and pull it through with one of these….

https://www.amazon.co.uk/dp/B00L10X5Y6/ref=pe_3187911_189395841_TE_3p_dp_1

I was too curious after this post so I ordered both. The needle pushed it through on the first try. Thanks @Giles, that’s a handy trick.

[zatenm]

Coming along rather nicely…..

Sent from my iPhone using Tapatalk

[Matty123]

These things piss indigo.

[zatenm]

^agreed @Matty123

Sent from my iPhone using Tapatalk

[Dion]

Some patch love

Hairy denim

[Jordanxbuffer]

The sun decided to hang out in Michigan for a minute so I took a picture. I plan on doing a soak or wash on these in a week or 2

[zatenm]

Some close-up shots from 2 weeks ago:

Sent from my iPhone using Tapatalk

[Jordanxbuffer]

@zatenm:

Some close-up shots from 2 weeks ago:

Sent from my iPhone using Tapatalk

These are lookin great!!