Random questions to which you seek an answer
-
@Kacakembun I tried on one of the Railcar chore coats last weekend in Los Angeles. I would describe the sizing as American true to size. For reference I wear a 3XL in Iron Heart shirts and jackets and the Railcar XL fit me well. Hope this helps.
-
@Palmer i’m stuck between Medium or Large size on chore coat..should i keep Medium or go for one size bigger?
-
@Kacakembun if you wear a medium in Iron Heart I’m sure you’ll fit in a medium Railcar. If you’re unsure send them an email. Their customer service is great.
-
@Kacakembun if you wear a medium in Iron Heart I’m sure you’ll fit in a medium Railcar. If you’re unsure send them an email. Their customer service is great.
Thank you.
-
Anyone know if IH has ever done a 14oz black denim jacket? Not including the Ovsrdyed denim they produce. Either black fade to grey or super blacks or some other iteration (aside for OD)?
Thanks!
I’m pretty sure the answer is no. There hasn’t been a superblack or SBG iteration of either of the versions of the 14oz denim to date.
A post from @Giles recently on the samples thread, suggests that may change however…
-
I know it’s all a matter of personal preference and how you intend to wear the item, but generally speaking, for a trucker jacket (type 1, 2, 3), how much of an increase do you go up in chest measurements?
For example, my tailor measured my chest as 41”, what would be a good p2p size for me if I intended to wear the jacket well fitted over a t shirt?
21?
21.5?
22?What would be your advice or personal preference?
Sent from my iPad using Tapatalk
-
I know it’s all a matter of personal preference and how you intend to wear the item, but generally speaking, for a trucker jacket (type 1, 2, 3), how much of an increase do you go up in chest measurements?
For example, my tailor measured my chest as 41”, what would be a good p2p size for me if I intended to wear the jacket well fitted over a t shirt?
21?
21.5?
22?What would be your advice or personal preference?
Sent from my iPad using Tapatalk
Measure your best fitting jacket and you’ll have your answer.
Sent from my iPhone using Tapatalk
-
I saw you posted in waywt, what is the p2p on that jacket and what's your chest measurement?
Sent from my SM-N950U using Tapatalk
The p2p on my jacket is about 22” and my chest is around 39-40”. I typically only wear tops in the 22” to 22.5” range.
Sent from my iPhone using Tapatalk
-
Problem is it varies by designer and cut in my experience (arm hole height, etc).
I’m not sure that knowing your chest measurement and using it as a bench mark will really solve that issue if there is a meaningful difference in armhole height that affects where the jacket sits.
Your chest measurement is a fixed line measurement on your body whereas the line of the ptp is decided by the same the same variable you find problematic, namely the height of the confluence of the armpit seams. So your body stays the same but the ptp is going to move over or under that line depending on cut.
What you’re struggling with is the differences in cut and design and the issue extends to shoulders, body length and a the horizontal tapering throughout the body. At some point then trying things on is the only true way of seeing if you like the fit of something.
-
Thanks neph.
That's the struggle with buying over the internet. It's a challenge to try on and a pita to return, etc. Not the end of the world to return things, just annoying, so getting it right from the get go helps. I think essentially I'm always debating between only two sizes: smaller and a larger one. Just curious to see which way other people here lean towards, the tighter or looser option.
What size do you generally shop in tops and what how much greater is the p2p than you chest measurement?
I've read some people say that you go 1" greater than your measurements, some say at least 2 or 3… Just trying to get a sense of how more experienced shopper choose.
Sent from my SM-N950U using Tapatalk
-
If you go here:
https://www.ironheart.co.uk/forum/index.php?topic=12686.msg599519#msg599519
You will see how to access the sizing information of all the website "models"
-
What size do you generally shop in tops and what how much greater is the p2p than you chest measurement?
I've no idea what my actual chest measurement is
I'm generally an XL in shirts, an L in hoodies and I have jackets from IH ranging from L to XXL.
IHUK do a wonderful job of giving us all kinds of useful information, including access to this forum and the knowledge that represents, and people still get it wrong. That might be because people interpret the data badly, overthink things (guilty as charged) or just don't do the research.
But sometimes it is because a Type III made by Levi's and bought on the high street and a Type III made by IH are cut and sewn differently, made of different materials etc, etc, and will fit differently as a result. They can have the same measurements as each other and still be different.
I think the key word you use here is "experience". You'd imagine that the simplest of garments, a tee shirt, would be easy to size. When I ordered my first IH tee's about five years ago I measured three or four of my favourite tees worked out an aggregate and went from there. The IH tee's I ordered based on that were too big. In fact I ended up sizing down from XL to M. It was because of the way they're cut and the relationships between arm length, body length, shoulder width etc. They just weren't the same. I learned this through experience.
Some people can order based on what Giles wears, some people need to watch the ptp, others need to use all the measurements. Others still extrapolate from what they own. The pressure is on becasue returning is a pain in the ass, the garments are premium quality, with a price tag to match and we're usually ordering online, but the only thing to do is to do the research, use the data, ask the questions then cross your fingers.
Can I ask what you are specifically looking at and whether you own any IH tops from before?
-
Thanks neph.
That's the conclusion I am reaching (it's not that simple and it is at the same time)….
Right now, I am upgrading trucker jackets. As odd is this may sound, I am new to buying my own clothes in the sense that I actually care about the details of fit and product now. I am a former teacher (administrator now), so on meager pay and big loans, I shopped the bargain bins at discount stores and I really didn't give much thought about how clothes fit. I relied on my wife and previous girlfriends to steer me in the right direction...
Becoming an administrator and having to wear tailored clothing taught me about the importance and variability of "fit". Now I am trying to build a casual wardrobe that fits and is made of fewer, but better quality garments. I mean I am a T shirt and denim guy at heart....
So, long winded response, but I am upgrading truckers at the moment. I have both the 9526PJ (large, purchased at a US retailer online) and the 9526J (medium, purchased second hand from this forum). The medium has a 21.3 or 42.6 chest and is tighter than the large with a 22.1 or 44.2 p2p. I'm a weird fit and size... I have long arms, short torso, short height, wider shoulders and chest... A mashup of most mediums and larges I see on the sight.. I have long thin legs too, so I try to wear short rise pants which throws relative/visual dimensions of my tops off too.
I am doing my research in the sense that I watch the jacket threads and WAYWT threads to visually see how people prefer to wear their tops and in this instance also ask about the numbers. I will also be doing aggregates on the "models'" numbers across items too. I also research and think way to much about these details....
I am just not quite sure about what would be too long or too tight? Which, as you noted, for some us takes time and experimenting. I love the return policy, which gives me confidence. I am just lazy about getting to the post office!
Thanks for your help and any future advice is always welcome. This place has been helpful and I am developing an affinity for this brand because of this community’s presence and support. It was helpful to hear your and other people's opinions when I posted a fit check because I was use to traditional truckers being shorter than the modifieds, which felt uncomfortably long at first, and I am getting used to.
Sent from my SM-N950U using Tapatalk
