RS-M25 - GOOD ART HLYWD Model 25 Ring

[spaniarddh]

@Giles:

Buy ring sizing tool from eBay.  Cost next to nothing…..

That’s another good idea [emoji362].

Enviado desde mi iPhone utilizando Tapatalk

[Giles]

Or Amazon…...

https://www.amazon.co.uk/Sukmax-Finger-Sizing-Measuring-Measurements/dp/B0915KFTS1/ref=sr_1_7?dchild=1&keywords=ring+sizing&qid=1629790556&sr=8-7

[DrPat]

@Giles:

Or Amazon…...

https://www.amazon.co.uk/Sukmax-Finger-Sizing-Measuring-Measurements/dp/B0915KFTS1/ref=sr_1_7?dchild=1&keywords=ring+sizing&qid=1629790556&sr=8-7

But keep in mind that GA rings are typically much wider than the sizing rings.  In my experience, this makes them fit a bit tighter.

[Kasi]

That why I size up to be on the safe side

[Joberwocky]

I just picked up a model 28, and while both my index and middle fingers of my right hand easily measure to fit the size 9.75 ring, it is WIDE, and only really makes it on to my ring finger.  It's a definite thing to consider that that wider the ring is, the more you should size up, maybe even half a size or more over measure.  The width makes a huge difference

[cityofdelusion]

So I have a ring sizer just like the one @Giles posted and it says that I'm a US 7.5.

Should I go with a US8 then since everybody suggested going for half a size larger than what the ring sizer says?

[LewisStonehouse]

@DrPat:

@Giles:

Or Amazon…...

https://www.amazon.co.uk/Sukmax-Finger-Sizing-Measuring-Measurements/dp/B0915KFTS1/ref=sr_1_7?dchild=1&keywords=ring+sizing&qid=1629790556&sr=8-7

But keep in mind that GA rings are typically much wider than the sizing rings.  In my experience, this makes them fit a bit tighter.

I would second this - I recently got the 25 and it was a struggle even getting the 12 to fit because of the width

[cityofdelusion]

@LewisStonehouse:

I would second this - I recently got the 25 and it was a struggle even getting the 12 to fit because of the width

Did you go up half a size from your ring sizer/ring size?

[LewisStonehouse]

I think I'm a full size up on that finger and it can still feel a tiny bit tight on a hot day

[cityofdelusion]

Mailed Good Art regarding the Model 25 and asked if they recommend sizing up from what the ring sizer says. I've been told that I should go with what my ring sizer says.

I'm confused since there are contradicting experiences here. Back to square one

[cityofdelusion]

@Kasi:

Buy a ring sizer or go to a jeweller

Read my messages first

[cityofdelusion]

Lesson learned: Don't go with what your ring sizer says. In my experience, go up a whole size to one and a half from what your ring sizer says.

My ring sizer says I'm a US 7.5. After reading this thread I ordered half a size larger ( US 8 ) and it was too tight. Based on that experience, I estimated that US 9 should fit better and it does – fits perfectly now.

[sabergirl]

I wear an 8.5 in this ring, on a finger where I have thinner rings at 7.5.

Sent from my iPhone using Tapatalk

[Graham]

LIMITED RESTOCK

[Matt]

My new wedding ring came and went.  I tried on some rings at the jeweler’s and a 10 was just snug enough to not slide off without some effort but the 10.5 in the 25 proved to be too loose. Sending it back today for a 10.  Was so pumped for it. 

[Kasi]

Good Art ring trend to be bigger in sizes

You will get the idea

Sent from my iPhone using Tapatalk

[Matt]

That’s what I was hoping but this just slid right off.  The 10.5 wouldn’t have worked.

[Tobi]

Just arrived in 11.5. Ever so slightly too large for the ring finger.. but works just fine on three others. Love it!